Fundamentals

IPX4 vs IPX7 on Electric Spin Scrubbers

What IPX4 and IPX7 actually test on electric spin scrubbers, which claim each rating supports, and why listing copy must match the report.

Youwang Manufacturing · Published October 8, 2026 · Updated October 24, 2026 · 3 min read

Short answer

IPX4 and IPX7 are ingress-protection ratings with different test methods: IPX4 verifies resistance to water splashed from any direction, while IPX7 verifies the sealed enclosure survives immersion at 1 metre for 30 minutes. A splash-rated scrubber can be used in a wet bathroom but not submerged; only an IPX7-verified model supports a 'submersible' or 'fully washable' claim.

Key points

  • IPX4 is a splash test; IPX7 is a 1 m / 30 minute immersion test.
  • IPX7 requires gasketed enclosures and sealed ports — it is a design decision, not a coating.
  • Verify the rating per model with an immersion report; 'waterproof' without one is a returns problem.
  • Our G002, G003 and G017 carry IPX7 reports; G001 is splash-rated (IPX4) by design.

What the two tests actually do

IPX4 places the device under an oscillating spray from every direction for a fixed duration. It answers one question: can the tool survive a wet bathroom?

IPX7 lowers the device into 1 metre of water for 30 minutes. It answers a different question: can the tool be dropped into a bucket, a sink or a tub and keep working?

The engineering distance between those two answers is a gasketed enclosure, sealed ports and a different assembly process — which is why IPX7 costs more and why it is a model-level specification, not a brand-level one.

Where the claim meets the report

Model classRatingClaim the report supports
G001 long-poleIPX4“Splash-resistant — safe for wet bathroom use”
G003 long-poleIPX7“Submersible to 1 m (IPX7 verified)”
G002 extendedIPX7“Submersible to 1 m (IPX7 verified)”
G017 compactIPX7“Submersible to 1 m (IPX7 verified)”
G004 multi-functionPer reportStated per model file

The single most common cause of returns in this category is a splash-rated tool sold with submersible copy. Our spin scrubber platforms therefore state the rating per model, and the quality and compliance files include the immersion reports by model number.

The copy rule for your listing

Write the claim the rating can carry:

  • IPX4: “splash-resistant”, “safe to use in wet bathrooms”
  • IPX7: “submersible to 1 metre”, “fully washable body”

Never: “waterproof” alone. The word has no test behind it, and marketplace reviewers — plus EU and US regulators — increasingly ask which one you meant.

The honest boundary

Even an IPX7 rating describes the enclosure as tested: brush heads, charging ports opened during use, and accessories are outside the claim. A listing that says “the body is IPX7-rated when sealed” is boring, accurate, and returns-friendly — which is the combination that survives a year of reviews.

This article describes general practice in appliance ODM manufacturing. It is not a substitute for a programme-specific review — certification status, MOQ and lead time depend on the exact model, configuration and destination market.

Questions

Frequently asked

Can I rinse an IPX4 scrubber under the tap?

Briefly and with the battery compartment sealed, yes — IPX4 covers splashing water from any direction. But the body is not designed for submersion, so copy should say 'splash-resistant', not 'washable under water'.

Does IPX7 make the brush heads waterproof too?

The rating applies to the sealed enclosure as tested. Brush heads and Velcro mounts are consumable accessories; the immersion claim belongs to the body, which is how the report and the listing should both describe it.

Send drawings, get a quote in 24 hours

Upload a STEP file and a drawing. You will receive a fixed-price quotation with lead time and a written DFM report — no obligation, and no sales call unless you ask for one.